Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Trusted Garage Door Repair for Plano Homeowners
Garage door repair in Plano typically costs between $150 and $600, and most repairs are completed the same day we arrive. That range covers the common failures we see across this part of Collin County: worn torsion springs, snapped lift cables, rollers that have ground themselves flat, and sensors knocked out of alignment. We’re Servo Garage Doors Plano, an independently owned and operated business under The Haven Standard, and since 2015 we’ve documented every job we’ve done across this metro, from historic homes near Downtown Plano to newer construction in Legacy West and Willow Bend. If your door is down and won’t move, call us at (469) 455-3103. A live person answers, day or night, and you’ll get a named technician with an on-the-way text, not a callback window.

Key Takeaways
- Garage door repair in Plano runs $150-$600, with a written price and written scope delivered before any work starts.
- We repair all eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Same-day and 24/7 emergency service is available across Plano, Allen, Richardson, and the surrounding metro.
- Every visit closes with a documented photo record of what was found and what was done.
- All work is backed by the 365-Day Done Right Promise, per The Haven Standard.
What Our Garage Door Repair Service Includes
Here’s what a repair call with us actually covers, part by part. If you’re not sure which of these has failed, that’s fine. The diagnostic is included in your written quote, and Clause 4 of The Haven Standard requires that we photograph the failed component before we quote a replacement, so you see exactly what we saw.
Panel Replacement
A dented or cracked panel is more than a cosmetic problem. In a climate like Plano’s, where spring storms bring wind and hail, a compromised panel lets moisture into the door’s insulation and weakens the structural track alignment over time. We replace single panels or full sections through our Panel Replacement service, match your existing door where the manufacturer still produces that line, and give you a written price for the panel, the labor, and the haul-away before anything is ordered.

Spring Repair
Torsion springs do the heavy lifting on a standard overhead door, and they break under tension, which is why this is one repair we tell homeowners not to attempt themselves. A spring that snaps in a Plano garage usually breaks at the coil, and you’ll hear it; it sounds like a gunshot from inside the house. We measure the failed spring’s wire diameter, coil length, and inside diameter on site, install a matched pair where needed, and balance the door so the opener isn’t carrying more load than it was built for. Spring repair typically runs $180 to $340 in this market.

Cable Repair
Lift cables connect the door’s bottom brackets to the spring system, and they carry hundreds of pounds of tension every time the door cycles. When a cable frays or snaps, the door will often drop unevenly or jam against the track, and forcing it can bend the track itself. We replace cables on both sides when one has failed, inspect the bottom bracket and drums while we’re in there, and torque everything to spec before testing the full cycle. Cable Repair in Plano generally falls between $130 and $250.

Track Realignment
Tracks drift out of alignment over years of use, or suddenly if a wheel bearing fails or the door gets clipped by a car. You’ll notice it as grinding, a door that shudders or sticks mid-cycle, or a visible gap between the rollers and the track. We measure the track with a level at three points along each vertical, reset the brackets, and adjust the horizontal rails so the door travels straight without binding. Track realignment here runs $120 to $240.

Roller Replacement
Rollers wear out long before the door itself does. The nylon wheels on most modern doors in Plano last 7 to 12 years, and when they go flat or seize, the door gets loud and jerky and strains the opener. We replace old metal or worn nylon rollers with sealed-bearing units, which are quieter and don’t need lubricating, and we inspect the hinges while the door is on the track. Roller Replacement typically costs $110 to $220.

Sensor Calibration
The photo-eye sensors near the bottom of the track exist to keep the door from closing on a person, a pet, or a bike. When they’re misaligned or failing, the door refuses to close, or it reverses before touching the floor, and that’s usually the sensors, not the opener. We clean the lenses, realign the beam, check the wire connections, and if the sensor unit itself is dead, we handle Sensor Calibration and replacement with the correct OEM part. This is one of the more affordable fixes on the list, usually under $150, and it’s done the same day.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Repair

We service all eight major garage door brands, and we stock OEM parts for most of them on the truck. On a Chamberlain or LiftMaster system, the failure is usually in the opener side, a logic board or a trolley carriage, and we carry the boards and carriage assemblies that match those units year for year. We’ve diagnosed hundreds of those openers across Plano and Richardson, and we can usually tell you over the phone whether it’s worth repairing or replacing based on the unit’s age and motor type.
Genie and Craftsman openers have their own common failure points, usually the limit switch or the gear-and-sprocket assembly, and we keep those parts in stock too. On the door side, Amarr, Clopay, and Wayne Dalton all build doors with different hinge and spring systems, and we match the replacement parts to the manufacturer’s spec rather than using universal parts that sort of fit. Whether you have one of those makes or a Raynor door, we’ll quote the repair based on what your door actually uses, and show you the failed part before we replace it.
Before
AfterSigns You Need Garage Door Repair Right Now
- The door is loud when it moves. Grinding, popping, or a metallic shudder usually means worn rollers, a failing spring, or a track out of alignment. Left alone, a small noise source becomes a seized bearing and a bent track, and the repair cost climbs.
- The door sags or drops when you release it from the opener. A properly balanced door stays put when you pull the release cord. If it drifts down, the springs are losing tension, and the opener is working against extra load every cycle, which shortens its life.
- The door reverses before it hits the ground. This is almost always a sensor alignment or wiring issue, not a major mechanical failure, but it leaves your garage open to the Texas heat and to rodents, and it’s worth fixing on the same call rather than bypassing the sensors.
- You can see daylight around the door or a gap at the bottom. Plano summers drive cooling costs up fast, and a door that doesn’t seal lets conditioned air out and dust and bugs in. Sometimes it’s a weather seal; sometimes the door itself has shifted on the track.
- The door is binding or jerking mid-cycle. If the door catches on one side, the tracks are out of parallel or a cable has slipped its drum. Forcing it open or closed can do real damage to the track and the opener.
Our Garage Door Repair Process - Step by Step

- 1
You call, a person answers. When you call (469) 455-3103, a live dispatcher answers, day or night. We take your address in Plano, ask what the door is doing or not doing, and book a technician for a time that works for you. If it’s an emergency call, we dispatch immediately and text you the technician’s name before they’re on the way.
- 2
We diagnose and photograph. The technician arrives, inspects the door, opener, and hardware, and photographs the failed component before quoting anything. Clause 4 of The Haven Standard is the reason for this: you see the broken spring or the snapped cable before we put a dollar figure next to it. We don’t quote from the van based on a guess.
- 3
We deliver a written price and a written scope. Before any work starts, you get a flat price for the repair, a written list of what’s included, and a note of anything we recommend but aren’t doing that day. Clause 1 of The Haven Standard means this is non-negotiable. You approve it, and only then does the work begin.
- 4
We make the repair and test the full cycle. The repair is done with manufacturer-spec parts, and then the door is run through a full open-close cycle while we watch the balance, the travel, and the force settings. If the opener is lifting more than it should, we adjust it. If the door is binding, we correct it before we leave.
- 5
You get the paper trail. Every visit closes with a documented photo record: the failed part, the new part, the work area, and the door operating after the repair. You also get the written warranty for the parts and labor, tied to the 365-Day Done Right Promise. You’ll know what we found, what we did, and what it cost, and you can refer to the photos any time.
How Much Does Garage Door Repair Cost in Plano?
A typical garage door repair in Plano runs $150 to $600, depending on what failed and how many components died together. Here’s the line-item breakdown for this market:

- Spring repair: $180-$340
- Cable repair: $130-$250
- Opener repair: $120-$320
- Opener installation: $250-$550
- Panel replacement: $250-$500
- Track realignment: $120-$240
- Roller replacement: $110-$220
- New door installation: $700-$2,200
What drives the price are the part itself, whether it’s a single spring or a matched pair, and the labor to get everything back into safe, balanced operation. A snapped torsion spring is the most common repair we do in Plano, and it’s mid-range on cost because the spring has to match the door’s weight and height exactly. The best way to avoid overpaying is to work with a company that quotes a flat price before starting; that way the number doesn’t move on you. Our written estimate includes the diagnostic, the part, the labor, and the photo record, and it’s yours to keep whether or not you approve the work. If you have a written estimate from another company, bring it. We’ll give you a free second opinion on it, no coupon or code required.
Garage Door Repair Near Plano - Our Service Area

We run repair calls all over Collin County and the north Dallas metro. Our technicians are on the road in Plano daily, and we routinely cover Allen, Richardson, Frisco, Carrollton, McKinney, Garland, Lewisville, Dallas, Irving, Rockwall, and Grapevine. Typical response time for a non-emergency repair inside Plano is the same day, and emergency calls are dispatched immediately. If you need garage door repair in a neighboring city, we can help there too; see our pages for Garage Door Repair in Allen and Garage Door Repair in Richardson for the local specifics.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Repair in Plano

Garage door repair is the process of diagnosing and fixing a failed component in the door system, whether that’s a torsion spring, lift cable, roller, track, sensor, or opener part. In a Plano home, the most common repairs are broken springs, cables that have snapped or slipped, and sensors knocked out of alignment. We do the diagnostic work on site, photograph the failed part, and give you a written price before any repair work starts.
Most garage door repairs in Plano are completed in 45 to 90 minutes after we start. A spring replacement or cable replacement is typically a one-visit fix, and we carry the common parts on the truck so there’s no waiting for an order. Panel replacement and full track realignment can take longer, two to three hours, depending on the door’s size and how many panels or brackets need work.
Garage door repair in Plano costs $150 to $600 for most jobs. A roller replacement starts on the low end at $110 to $220, while a torsion spring repair runs $180 to $340, and panel replacement lands at $250 to $500. Your exact price is quoted in writing before any work begins, and that quoted price is the price, no surprises at the end. Call (469) 455-3103 for a free estimate, and we’ll put the number on paper.
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor garage doors and openers, and we stock OEM parts for most of them on the truck. LiftMaster and Chamberlain failures are usually in the opener unit itself, the logic board, trolley carriage, or limit switch, and we can diagnose those quickly and quote you a repair or a replacement based on the unit’s age. We’ll show you the failed part before we quote anything.
Yes. We answer the phone 24 hours a day, 7 days a week, including holidays, and a live person, not a recording, takes your call. If it’s an emergency, like a door that’s stuck open or a spring that’s snapped and left your car trapped inside, we dispatch a named technician immediately and text you when they’re on the way. Same-day emergency response is available across Plano and the surrounding metro.
Every repair we do is backed by the 365-Day Done Right Promise, which means if the repair isn’t right, we make it right, backed by The Haven Standard and its terms page, not a handshake. That covers the parts and the labor for a full year from the date of service. You’ll get the warranty in writing when the technician closes out the job, along with the photo record of everything that was found and done.
Clear the area two to three feet inside the garage around the door tracks and the opener, and move your vehicles outside if the door can’t be opened. If you can, pull the release cord and tell us whether the door moves freely or sticks. That helps the technician narrow the diagnosis before they arrive. Beyond that, all you need to do is be home when we get there; the diagnostic, the quote, and the work are all handled on site.
Schedule Your Garage Door Repair Service in Plano Today
If your garage door is misbehaving, call us at (469) 455-3103 and we’ll book a technician for a same-day or next-day visit in Plano. You get a free, no-obligation written estimate before any work starts, a documented photo record when the job is done, and the 365-Day Done Right Promise behind every repair. If it’s an emergency, we answer live all day, every day. Call now and get a real person on the line.
Written by Marcus Deller, Owner at Servo Garage Doors Plano, serving Plano since 2015.






Before
After
Before
After